Flowmeters for mass flow measurement of steam
OPTISONIC 7300
Ultrasonic flowmeter for natural gas, process gas and utility gas applications
- 2-path meter, for standard volume flow metering, independent of media properties
- No maintenance, no pressure loss, large dynamic range
- Flange: DN50…1000 / 2…40", max. PN450 / ASME Cl 2500; also weld-in connections
- 3 x 4…20 mA, HART®, Modbus, FF
OPTISONIC 8300
Ultrasonic flowmeter for superheated steam and high temperature gases
- 2-path meter with optional mass flow and enthalpy calculation
- For steam billing, boiler or power plant monitoring (up to +620°C / +1148°F)
- DN100…1000 / 4…40"; max. PN250 / ASME Cl 2500
- Large turndown ratio (60:1)
OPTISWIRL 4200
Vortex flowmeter for utility applications and energy management systems
- For liquids, (wet) gases, saturated and superheated steam (+240°C / +464°F)
- Integrated P+T measurement: direct output of mass, nominal flow, energy, gross/net heat
- Flange: DN15…300 / ½…12"; wafer version: max. DN100 / 4"
- 2-wire, 4…20 mA, HART®, FF, Profibus-PA
OPTISWIRL 5080
Vortex flowmeter for high temperature applications
- For liquids, gases and steam up to +427°C / +800°F
- Adaptive filtering and signal conditioning
- Flange: DN15…300 / ¾…12", max. PN160 / ASME 1500 lb;
Sandwich version: max. DN200 / 8" - 2-wire, 4…20 mA, HART®
Compact orifice plate flowmeter
Integral DP flowmeter for liquids, gases and steam
- Fast and easy installation without additional engineering, impulse lines and supports
- Up to +400°C / +752°F; max. 160 bar / 2320 psi (line pressure)
- Line size: DN50…600 / 2…24"
- 2-wire 4…20 mA/HART®, FF, Profibus-PA
Integral orifice meter run assembly
DP flowmeter for process applications with small line sizes (down to DN15 / ½")
- Standardised calibrated meter run assembly, designed acc. to ISO 5167 or ISO TR 15377
- Up to +400°C / +752°F; max. 160 bar / 2320 psi (line pressure)
- Flange: DN15…100 / ½...4"
- 2-wire, 4…20 mA/HART®, FF, Profibus-PA
Averaging pitot tube flowmeter
DP flowmeter for applications with liquids, gases and steam to high-temperature applications with dust-laden gases
- Fast and easy installation without additional engineering, impulse lines and supports; the best retrofit capability
- -200…+1150°C / -328…2102°F; max. 320 bar / 4641.2 psi (line pressure)
- For line sizes DN50…2000 / 2…80" (larger on request)
- 2-wire 4…20 mA/HART®, FF, Profibus-PA
Flow nozzle meter
DP flowmeter for long-term stable flow measurement with reduced pressure loss
- Based on ISA 1932, long radius or Venturi nozzle (acc. to ISO 5167-3 or ASME MFC-3M)
- Accurate flow measurement at high flow velocities (e.g. feed water, steam, condensate, hydrocarbons, refined products, CO2, LH2)
- Manufacturing capability up to 48”; inhouse calibration also for applications with high Reynolds numbers
- Complete scope of supply from one source, incl. engineering, documentation, testing, calibration, valves, flow nozzle, process instrumentation, etc.
Venturi flowmeter
DP flowmeter for the highest requirements of accuracy and long-term stability
- For acceptance testing, billing, reference measurement of steam, feedwater, hydrocarbons etc.
- Machined or welded and internally machined design acc. to EN ISO 5167 and ASME MFC-3M; low remaining pressure loss
- Manufacturing capability up to 48”; inhouse calibration also for applications with high Reynolds numbers
- Complete scope of supply from one source, incl. engineering, documentation, testing, calibration, valves, Venturi, process instrumentation, etc.
Wedge flowmeter
DP flowmeter for harsh process applications with abrasive and viscous media
- Rugged design, suitable for abrasive/solids-containing fluids and high viscosities (ferromagnetic slurries, coker feed, ADU/VDU residues, etc.)
- Up to +500°C / +932°F; max. 160 bar / 2320 psi line pressure (others on request)
- Flange: DN50…600 / 2…24" (others on request)
- 2-wire 4…20 mA/HART®, FF, Profibus-PA
Cone flowmeter
DP flowmeter for limited installation space
- Only limited straight inlet/outlet pipe sections required
- Standard material: stainless steel, other materials on request (e.g. Alloy C276, Alloy 625, Alloy 400, Duplex, etc.)
- Standard (ISO 5167-5) sizes from DN50…600 / 2…20"
- 2-wire 4…20 mA/HART®, FF, Profibus-PA
OPTISWIRL 2100
Vortex flowmeter for basic utility applications
- For liquids, (wet) gases, saturated and superheated steam (+240°C / +464°F)
- Available with integrated nominal diameter reduction for a large measurement span also in pipelines with large diameters
- Flange: DN15…300 / ½…12"; wafer version: max. DN100 / 4"
- 2-wire, 4…20 mA, HART®7